Be the first to leave a product review for this item! Write a Review

The card enclosure is a smooth, high quality cardstock.
This design has a top facing pocket on the bottom flap of the card and a flap on the top to fold over the card. The card is 5" x 7" after folding.

Assembly Instructions:

Center Flap:

The center flap can be used to display the main body of the invitation (event, participants, dates, location, etc...)

The paper to be placed on the center flap (5" x 7") is called the Base. We would recommend having the Base for this flap cut to 4 1/2" x 6 1/2" and center on the flap. You can order any of our papers and use our Custom Cutting service to have the paper trimmed to the size you need. We also have Pre-Cut Base Cards in Bright White Solid or you may order paper uncut and have it cut locally. You can use our Adhesives or any adhesives intended for photo mounting to adhere the Base on the middle flap.

Please note a 5" x 7" card would be too large to use as a base card.

• Pre-Cut Base - Solid Bright White Cardstock 80# (4 1/2" x 6 1/2" for A7 Cascade design)
• Adhesives (Lines or Squares will work well)

Right Pocket Flap:

The pocket can be used to display additional event details, maps, directions, rsvp cards, reception cards, hotel & registry information, etc... The flap is 5" x 6 1/2", but due to construction of the pocket, the maximum width that can be placed inside the pocket is 4 3/4".

The paper to be placed inside the pocket is called the Pocket Insert.. We would recommend having the Pocket Inserts cut to 4 3/4" wide and 6 1/4" tall for a nice fit. The Pocket Inserts can then be trimmed to achieve a layered look. You can order any of our papers and use our Custom Cutting service to have the paper trimmed to the size you need. We also have Pre-Cut Pocket Inserts in Bright White Solid Cardstock or you may order paper uncut and have it cut locally.

• Pre-Cut Pocket Insert - Solid Bright White Cardstock 80# (4 3/4" x 6 1/4" for A7 Cascade design)
  
  Envelopes: If you are including an envelope inside the pocket, we would recommend using a 4 Bar or A2 size envelope inside the pocket.

Closing:

When assembled, the card will fit perfectly into the matching A7 Envelopes. If desired, the Pocket Card can be kept closed with Seals (not included).

• Seals

Due to the style of the card, it is NOT compatible with most home printers. It is best to print on an insert and adhere to the middle flap or place inside the pocket on the right side. If you need printing directly on the card, please contact a local print shop.

Cards can be ordered at a low cost to test in your printer or to feel the quality. Shipping is only a flat $1 for as many samples as you would like.

Please note that pocket inserts are not included with the pocketfold samples and are sold separately.